Theta Industries, Inc. Presents:

Theta Questionaires

Graphic Map

Questionaire for Spare Parts.

Please fill out all the following information as accurately as possible. Then click on the "Submit" button to send this form to Theta Industries for processing. Make sure you eneter your e-mail address and phone number so we can contact you!



Instrument Questionaire for DTA and TGA

Submitted by
Title
Organization
Department
Street
Address2
City
State
ZIP
Country
Telephone
Extension
Fax
E-mail
1: Configuration
Horizontal
Vertical
Specimen Support Platform
Specimen Support Disk
Thermocouple Clip with bushing slot
without bushing slot
Inside Thermocouple
Specimen Holder Maximum Temperature
-170°C to 450°C
> SiO2
1000°C
1600°C - Al2O3
1700°C
> Sapphire push rod
1800°C
2000°C Graphite or tungsten

|

|
2100°C
2300°C
Specimen Environment
Air
10-2 torr vacuum
10-4 torr high vacuum
Protective gas
Corrosive gas, stainless required
Specimen Dimension
Length Diameter
50mm (2") 1"
25mm (1") standard 3/4"
10mm 1/2"
1/4"
1/8"
Specimen Holder Tube Material
SiO2
Al2O3
C
W with water cooling
without water cooling
Specimen Holder Dimensions
Overall Length
Inside diameter
Outside diameter
Pushrods
Single Differential
Length w/o threads
Overall Length
Inside diameter
Outside diameter
Thermocouple
K B
Platinel C
S Other ->
Tip to tip length
Sleeve length
Protection Tube
Mullite w w/o water cooling
Fused silica
Sintered alumina
Insulator, radiation shield Felt Solid
Overall length
Inside diameter
Outside diameter
O Ring Carrier shoulder diameter
32mm Note: Since 1998, new protection tubes are supplied with 40mm flanges.
32/40mm
40mm
Enter additional information, comments or questions



Request More Information

Theta Industries, Inc. is committed to providing our customers the leading edge of technology, service and support with the finest instruments available.
Phone, fax or write for further information, pricing or upgrade options.


Theta Industries, Inc. 26 Valley Road Port Washington NY 11050 USA

Phone: (516) 883-4088 Fax: (516) 883-4599 E-mail: theta@theta-us.com

Return to home page - - Software - - Dilatometer Listing
Thermal Analysis Listing - - Conductivity Listing - - Viscometer Listing

This web site is designed and maintained by Bearly Computing.
If you have any comments or questions about the site, please feel free to contact
Rich at: rich@bearlycomputing.com

Last updated on Monday, June 03, 2002
Please note: Theta Industries, Inc. and this web site (www.theta-us.com) are in no way or form affiliated with any religious group or activities.